|
|
Build Your Online Product Catalogs?
| Product Name: |
Manual mold design silicone rubber
|
| Supply Ability: |
|
| Related proudcts |
silicone rubber, liquid silicone, rtv, |
| Specifications |
Manual mold design silicone rubber |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
|
| Unit Price: |
|
|
Molding silicone rubber features description
Molding silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Molding silicone rubber operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: our co***ny does not recommend you to add silicone oil. If a special soft silicone mold or fine ***ailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)
Frequently asked questions of molding silicone rubber
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine ***ailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
|
| Company: |
SHENZHEN HONG YE JIE TECHONOLOGY CO***NY
|
| Contact: |
Mr. Michael Zhou |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China |
| Postcode: |
518711 |
| Tel: |
086-755-89948019 |
| Fax: |
086-755-89948030 |
| E-mail: |
|
|
|
|
Home
